24 Turning the power OFF
[4]
Tap [Enter].
The table moves to the front side of the printer.
[5]
Remove the media and the jig on the table, and then tap [Enter].
• The table, carriage and cleaning wiper move to gain access to daily
maintenance.
[6]
The message on the left will appear.
• You can start daily maintenance.
"Performing Daily Maintenance" P. 117
• After the daily maintenance is complete, tap [Enter].
The message on the left will appear.
[7]
The printer automatically performs the Short cleaning.
[8]
After the Short cleaning, this printer will start turning off.
DailyMaintenance
Start ー> Enter
UnloadMedia
thenTapEnter
DailyMaintenance
End ー> Enter