MUTOH XPJ-461UF - Page 48

48 Menus you can access while printing
Use this menu to reset the waste ink counter to zero, if you empty out the waste ink tank during printing.
[2]
Use or to choose the information you want to check.
• ToDoLength: displays the length of the current job (in media feeding
direction).
• Done: displays the length of the current job that has been already printed.
• Remain: displays the remaining length to finish printing.
• Remain time: displays remaining time to finish printing.
Note
• Indicated value is approximate. The accuracy of the value is not guaranteed.
• If the print job data does not contain length information, “0” will be displayed in the Job Status menu.
Menu4: Reset Waste Ink
[1]
Tap .
[2]
Use or to select “Yes”.
•Tap [Enter].
The counter will be reset to zero.
JobStatus
ToDoLength:   0.0m
JobStatus
Done:    0.0m
JobStatus
Remain:   0.0m
JobStatus
RemainTime:   0min
Menu4
ResetWasteInk
Initial.Parameter?
No
**Initializing**