MUTOH XPJ-461UF - Page 70

70 Set1: User Type
PF5. Micro Change
Use or to enter the micro adjustment value, and tap [Enter].
Setting values
-5.00% to <0.00%> to 5.00%
<> indicates the initial value.
**>4: Vacuum Fan
Sets up vacuum fan operation. It has the role of fixing the media to the table.
• If you are using a thin or delicate media and there is risk of it wrinkling due to
the fan, set a lower value for the fan.
• If you are not using the optional vacuum table on the printer, this menu does
not appear on the panel. The rest of the menus will be displayed with a
different menu number.
Setting values
<High> / Medium-Hi / Medium / Low / Off
<> indicates the default setting.
**:PFAdjust5
MicroChange
**:MicroChange
(-5-5)   0.00%
Type**:4
VacuumFan
**:VacuumFan:
High
**:VacuumFan:
Medium-Hi
**:VacuumFan:
Medium
**:VacuumFan:
Low
**:VacuumFan:
Off