GT10/GT30
GT10 Configuration Settings
94
5.2 Entering Configuration Settings from GTWIN Screen Creation Tool
CAUTION
•
Data for PLC devices held in the GT10 will be written to the internal
PLC device the next time that the power supply is turned on.
•
If the power supply on the GT10 side is not turned on, the data can be
held for the period of time that the backup with the internal secondary
battery is effective. For information on the internal secondary battery
specifications, see “What the Internal Secondary Battery Does” on
page 147.
5.2.8 GT Configuration Settings: “GT Internal Device Hold”
Clicking on the “GT Internal Device Hold” tab in the “GT Configuration Settings” dialog
box displays the screen shown below. “GT Internal Device Hold” is a function that holds
the values for an internal device (GDT or GWR) in the GT main unit.
“GT internal device hold” screen
To Next Page
Loading...