NAiS GT10 - Memory (2); Interface

SpecificationsGT10/GT30
5
1.1 GT10/GT30 Specifications
1.1.6 Memory (2)
Clock data and PLC device storage data (24 words max.)
Item GT10 specifications GT30 specifications
Memory SRAM
Memory backup
Backed up by internal secondary battery
(charged when power is on)
(Note) When using, set operation mode
switch on back of main unit to “ON” position.
Lithium battery (replaceable type)
CR2032 (commercially available)
1.1.7 Interface
Item GT10 specifications GT30 specifications
Communications ratings Conforms to RS232C
Conditions for
Baud rate: 9600, 19200, 38400,
57600, 76800, 115200 bits/s
Baud rate: 9600, 19200, 38400,
57600, 115200 bits/s
COM.
Port
Conditions
for
communications with
external devices
Data bits: 7 or 8 bits
Parity: None, Odd, Even
Stop bits: 1 bit
Protocol FP series supported/general-purpose RS232C supported
Connector Connector terminal base (5-pin)
Communications ratings Conforms to RS232C
TOOL
port
Conditions for
communications with
external devices
Baud rate: 9600, 19200, 115200 bits/s
Data bits: 8 bits
Parity: None, Odd, Even
Stop bits: 1 bit
Protocol Dedicated protocol
Connector
Mini-DIN (5-pin)