NAiS GT10 - Test Mode: Self - Diagnosis

GT10/GT30
GT10 Configuration Settings
102
5.3 Entering Configuration Settings from the GT10 Main Unit
5.3.7 Test Mode: “Self-Diagnosis”
Touching the [Test] key on the initial screen of the system menu displays the
self-diagnosis screen. This is used to run a hardware check of the memory, buzzers,
and other elements of the GT10.
Test mode screen
Procedure for bringing up the screen
[Initial screen]
↓
[Test] key
Touch SW
This runs an operation check of the touch switches.
B. Light
The color of the backlight changes at one-second intervals (in sequence from green
a red a green a orange).
Buzzer
This runs an operation check of the buzzer.
LCD
This displays a pattern and runs an operation check of the display.
Contrast
Touch the [+] and [-] keys to check changes in the contrast.
Learning the shortcut keys saves time!
[RETURN]To complete the settings and return to the previous screen,
touch the [ESC] key.
Explanation of this function
•
Test mode (self-diagnosis) screen
On the Test Mode screen, a dot appears next to the key switches of
items that have been tested. (The dots are cleared when the screen is
returned to the initial screen of the system menu.)