NAiS GT10 - Switching the Screen with the GT Main Unit

GT10/GT30
How the Various Functions Are Used
136
7.1 Switching Screens
7.1.2 Switching the Screen with the GT Main Unit
Using the function switch unit
GTWINhas“functionswitchingparts”(FSW0,FSW1,FSW2)inthepartslibrarythatcan
be used to switch screens on the GT main unit. These parts should be arranged on the
base screen and assigned the attributes indicated below.
Function switching parts: Attribute editing dialog box
Double-clicking on the parts arranged on the base screen, or selecting a switch part,
and clicking on the “Parts (T)” menu and then the “Edit Attribute” sub-menu displays
the dialog box shown above.
(1) Using the “Change Screen” operation mode
Select the “Change Screen” operation mode and specify the number of the screen to
be changed. Then press the switch part to switch the screen to the specified screen.
To return to the screen displayedjustpriortothecurrently displayedscreen, the “Return
to Previous Screen” operation mode can be used.
In this case, the value of the third word in the basic communication area / word
device(thenumberofthecurrentlydisplayedscreen)changestothat of the newscreen
number, but please be aware that the contents of the first word (the screen number
specified by the PLC) do not change. For detailed information, see page 139.