NAiS GT10 - Setting Mode: Clock Settings (Clock)

GT30 Configuration Settings
GT10/GT30
127
6.3 Entering Configuration Settings from the GT30 Main Unit
6.3.4 Setting Mode: “Clock Settings” (Clock)
Touching [Setting] on the initial screen of the system menu and then the [Clock] key of
thesetting mode menudisplaysthe clock setting screen. The internal clockof theGT30
is set here.
Clock setting screen
Procedure for bringing up the screen
[Initial screen]
↓
[Clock]
The time displayed on the screen is the current time indicated by the internal clock of
the GT30. Items can be changed by touching the item (year, month, day, hour, minute,
second) and touching the [+] and [-] keys to change the values.
Learning the shortcut keys saves time!
[ADJUST] Touching the [+] key increases the value, and touching the [-]
key decreases it.
[SET] Touching the [SET] key updates the Value Set and restarts the
clock. Touching the [ADJUST] key sets the seconds value of
the current time to “00”. A seconds value of 0 to 29 is
rounded off to the next lower value, and a seconds value of 30
to 59 is rounded off to the next upper value.
Example:
If the time is set to 12 (hours) : 35 (minutes) : 29 (seconds)
→ 12 (hour) : 35 (minute) : 00 (seconds)
If the time is set to 12 (hours) : 35 (minutes) : 30 (seconds)
→ 12 (hour) : 36 (minute) : 00 (seconds)
[RETURN]To complete the settings and return to the previous screen,
touch the [ESC] key.
Explanation of this function
Setting the day
The day is set automatically, based on the year, month, and date data.