GT30 Configuration Settings
GT10/GT30
131
6.3 Entering Configuration Settings from the GT30 Main Unit
6.3.7 Test Mode: “Self-Diagnosis”
The self-diagnosis is run from the initial screen of the system menu. This is used to run
a hardware check of the memory, buzzers, and other elements of the GT30.
Touch SW & DIP SW
This runs an operation check of the touch switches and the DIP switches.
Backlight & Buzzer
This runs an operation check of the backlight and the buzzer.
LCD
This displays a pattern and runs an operation check of the display.
Contrast
Touch the [+] and [-] keys to check changes in the contrast.
Learning the shortcut keys saves time!
[RETURN]To exit the system menu and return to the normal operation
mode, touch the [ESC] key.
Explanation of this function
•
Test Menu items
A dot [ • ] is displayed to the left of the key switch for items on the
Test Menu which have already been tested.
To Next Page
Loading...