NAiS GT10 - Entering Configuration Settings from the GT30 Main Unit; What Is the System Menu; Bringing up the System Menu

GT30 Configuration Settings
GT10/GT30
125
6.3 Entering Configuration Settings from the GT30 Main Unit
6.3 Entering Configuration Settings from the GT30 Main
Unit
6.3.1 What is the System Menu?
The system menu is a dedicated screen on which configuration settings for the GT30
are entered. Some of the items that can be specified here can also be set usingGTWIN
screen creation tool and then sent to the GT30, but others, such as the internal clock
andadjustmentsto the LCDcontrast level, can onlybeset usingthe system menu.This
section explains how configuration settings are entered using the system menu.
6.3.2 Bringing Up the System Menu
The following procedure is used to bring up the system menu.
(1) Touch the four corners of the LCD touch panel simultaneously.
Touch these four corners at the same time,
and continue pressing them for about one
second.
(2) The initial screen of the system menu is displayed.
The initial screen of the system
menuisdisplayedontheGT30.
Touching the [ESC] key exits
thesystemmenuandreturnsto
the normal operating mode.
* indicates the ROM version of the GT30 system.