NAiS GT10 - Connecting to the TOOL Port

Connecting and Communicating with the PLC
GT10/GT30
55
4.4 Connecting the FP2/FP2SH
4.4.2 Connecting to the TOOL Port
AIGT8192
GT30
FP2/FP2SH CPU TOOL port
GT10
FP2/FP2SH communication format settings
System register no. Item Value Set
410
Unit number 1
41
1
Data length 8 bits
4
1
1
Modem connection No connection
414
Baud rate setting 19200 bits/s
PLC communication cable: Mini-DIN 5-pin loose-wire cable (AIGT8192)
3
5
4
1
2
7/0.28
30/1.18
2000/78.74
(Unit: mm/inch)
Connector:
Made by JST Mfg. Co., Ltd.: MD-P15B (housing A)
MD-P16A (housing B)
MD-PS8T (shell)
MD-SP2240 x 5 (terminal)
Mini-DIN plug side signals
1 SG Brown
2 SD Red
3 RD Orange
4-- --
5-- --
Pin no. Abbreviation Wire color
Specifications L Product No.
2 m/6.56 ft
Mini-DIN 5-pin
Single-side
loose wire
AIGT8192
Connecting to the FP2/FP2SH TOOL port
GT10
3
5
4
1
2
No. 1 (brown)
Pin no. on PLC side
No. 3 (orange)
No. 2 (red)
1SG
2SD
3RD
4--
5--
PLC side
Pin no.
Abbreviation
SD SD
RD RD
RS RS
CS CS
GND GND
GT main unit side
Pin no.
Abbreviation