NAiS GT10 - Installing GTWIN; Procedure for Installing GTWIN in a Personal Computer

PreparationGT10/GT30
185
1.1 Installing GTWIN
1.1 Installing GTWIN
1.1.1 Procedure for Installing GTWIN in a Personal Computer
GTWIN is installed in a personal computer using the procedure outlined below.
1. Exit any applications currently running.
If there are any applications currently running, exit them.
2. Insert the setup CD.
Insert GTWIN setup CD in the CD drive.
3. Select “Run”.
Click on the “Start” button at the lower left of the screen,
or press the Ctrl + ESC keys to display the Windows
menu. Select “Run”.