GT30 Configuration SettingsGT10/GT30
107
6.1 GT30 Configuration Settings
6.1 GT30 Configuration Settings
Before using the GT30 for the first time, it must be set up by entering the GT30
configuration settings indicated below. Always check and enter the settings under “Basic
communication area to PLC”. For instructions on setting up the GT30, see page 42.
6.1.1 Two Types of GT30 Configuration Settings
1. Entering configuration settings from GTWIN screen creation tool page 109.
Withthismethod,GT30configurationsettings are enteredfromGTWIN screen creation
tool, and the GT30 configuration file is sent to the GT30. Most items can be set using
this method.
GTWIN GT30
GT30
configuration
file sent
2. Entering configuration settings from the GT30 main unit page 125.........
Some of the settings, such as the communication parameters, the internal clock, and
adjustments of the liquid crystal display contrast, can be set using the system menu of
the GT30. Settings are entered using the touch switches on the front of the panel.
GT30
To Next Page
Loading...