NAiS GT10 - Chapter 6 Gt30 Configuration Settings

Chapter 6
GT30 Configuration Settings
This chapter describes the configuration settings for the GT30, and how they should be
entered.
6.1 GT30 Configuration Settings 107.......................
6.1.1 Two Types of GT30 Configuration Settings 107...
6.2 Entering Configuration Settings from GTWIN Screen
Creation Tool 109....................................
6.2.1 Opening the GT Configuration Settings 109......
6.2.2 GT Configuration Settings: “Basic Setup” 110....
6.2.3 GT Configuration Settings: “Communication
Parameters” 112.............................
6.2.4 GT Configuration Settings: “Auto-Paging” 115...
6.2.5 GT Configuration Settings: “Startup Screen
Settings” 117................................
6.2.6 GT Configuration Settings: “Setup” 119..........
6.2.7 GT Configuration Settings: “Hold PLC
Device” 122.................................
6.2.8 GT Configuration Setting: “GT Internal
Device Hold” 123.............................
6.3 Entering Configuration Settings from the GT30
Main Unit 125.......................................
6.3.1 What is the System Menu? 125................
6.3.2 Bringing Up the System Menu 125..............
6.3.3 Setting Mode: “Liquid Crystal Display Contrast
Adjustment” (Contrast) 126....................
6.3.4 Setting Mode: “Clock Settings” (Clock) 127......
next page