NAiS GT10 - Connecting to the TOOL Port

GT10/GT30
Connecting and Communicating with the PLC
52
4.2 Connecting the FP0
4.2.2 Connecting to the TOOL Port
AIGT8192
GT30
FP0 TOOL port
GT10
FP0 communication format settings
System register no. Item Value Set System register
value
410
Unit number 1 K1
411
Data length 8 bits H0
Modemconnection No connection
414
Baud rate setting 19200 bits/s H010X
X is 0 to 6
PLC communication cable: Mini-DIN 5-pin loose-wire cable (AIGT8192)
3
5
4
1
2
7/0.28
30/1.18
2000/78.74
(Unit: mm/inch)
Connector:
Made by JST Mfg. Co., Ltd.: MD-P15B (housing A)
MD-P16A (housing B)
MD-PS8T (shell)
MD-SP2240 x 5 (terminal)
Mini-DIN plug side signals
1 SG Brown
2 SD Red
3 RD Orange
4-- --
5-- --
Pin no. Abbreviation Wire color
Specifications L Product No.
2 m/6.56 ft
Mini-DIN 5-pin
Single-side
loose wire
AIGT8192
Connecting to the FP0 TOOL port
GT10
3
5
4
1
2
No. 1 (brown)
Pin no. on PLC side
No. 3 (orange)
No. 2 (red)
PLC side
Pin no.
Abbreviation
1SG
2SD
3RD
4--
5-
Abbreviation
GT main unit side
Pin no.
SD SD
RD RD
RS RS
CS CS
GND GND
←To set 19200 bits/s for both
the COM. port and the TOOL
port, “H0100” should be set.