NAiS GT10 - Exiting GTWIN

PreparationGT10/GT30
193
1.3 Exiting GTWIN
1.3 Exiting GTWIN
1.3.1 Exiting GTWIN
1. Select [Exit] on the “File” menu.
To exit GTWIN, select “Exit” on the “File” menu.
2. Save the file.
If screen data has been edited but has not yet been saved, a message like that shown
below is displayed on the screen. Click on [Yes] to save the data.
Key points
GTWIN can also be exited by pressing [Alt] + [F4], or by clicking on the
“Close” box at the upper right of GTWIN screen.