GT10/GT30
GT30 Configuration Settings
116
6.2 Entering Configuration Settings from GTWIN Screen Creation Tool
Auto-paging settings
If “On” is selected for auto-paging, and the [Setup] button is clicked, a dialog box
containing the following auto-paging settings is displayed.
Clicking on the
button for “Screen No.”, “Time”, or “Jump to” displays a “Value Set”
dialog box. Set the value and click the [Save] button to save values one at a time.
Screen No. - - - This specifies the screen targeted for auto-paging.
Time - - - Thisspecifiesthe time for whichthe screen specifiedabove isdisplayed. The
setting range is from 1 to 255 seconds.
Jump to - - - This specifies the number of the next screen to be displayed.
[Return] - - - This completes the auto-paging settings and returns to the
“Auto-Paging” dialog box.
[Delete] - - - This deletes screens registered for auto-paging.
[Save] - - - This saves the settings for the screen number, time, and jump destination
as auto-paging settings.
To Next Page
Loading...