GT10/GT30An Overview of GT10 Functions
xxiv
Ultra-thin body is only 32 mm/1.26 inch deep
The in-panel depth is a mere 32 mm/1.26 inch (including the fittings), configuring an
ultra-thin body and taking up a bare minimum of space.
32
mm
/1.26
inch
Through function is convenient for debugging
Ifconnectionsaremadeasshowninthediagram,aconvenient“through”functionmakes
itpossibletotransferdatafromthe GT10andcarryoutPLCdebuggingatthesametime
that communication is going on between the GT10 and the FP series PLC. This
significantly boosts efficiency in the workplace.
PLC
GT10/GT30
Cable connected to
COM or TOOL port
of PLC
Screen
transfer
cable
AFC8503
PLC debugging
Screen data
being sent
and received
Screen creation tool GTWIN
FP series programming tool
FPWIN GR
Personal computer
The FPWIN GR and NPST-GR can
be booted on the computer being
used to edit GT series screens, and
PLC programs edited and monitored
through the GT series.
Maintenance is easier than ever before
LEDs are used for backlighting, eliminating the fuss and bother of replacement. Screen
data is saved to an F-ROM, while other data is backed up by an internal secondary
battery,sonobatteryreplacementisneeded.Thisassureslong-term,stableusewithout
worrying about lost data.
To Next Page
Loading...