Setup
GT10/GT30
33
3.1 Setup Procedure for the GT10
When the menu operation as shown at the left page is carried out, the configuration file
is sent to the GT10. During the transfer, a screen like that shown below is displayed.
GTWIN
GT10
Transferring
PC→GT
GT10 Configuration
file being transferred
Screen transfer cable
(AFC8503)
(4) Setup is completed.
If the transfer has been completed without any problems, the setup is completed.
CAUTION
Backup of the GT10 Configuration file
The GT10 Configuration file is stored in the user memory (F-ROM) of the
GT10. This file is deleted if the memory is initialized using the command
on the system menu of the GT10 main unit (see page 101), and will have
to be transferred again.
To Next Page
Loading...