12.2 Operating mode specific functions
Narda IDA-3106 213
12.2.2 Signaling the maximum level audibly
Main Menu • Settings • Beep on new Maximum
A new maximum level can also be indicated by a beeper. To do this, you
must activate the Beep on new Maximum function in the main menu under
Settings and activate the Maximum Hold (Max) trace type.
To activate the beeper:
See Editing device-specific settings on page 68.
12.2.3 Showing and hiding channels
You can specify the channels that are to be measured in the Select Menu.
To show or hide specific channels:
1. Press the Select Menu softkey.
The Select menu opens.
2. Select the channels required using the rotary control knob and the
softkeys.
You can find information on how to select items from a list under
Selecting entries from a list on page 52.
3. After you have selected the channels, press the OK key.
The selected channels will be displayed.
12.2.4 Setting the resolution bandwidth (RBW)
Setting RBW automatically
The IDA-3106 sets the RBW automatically using the basic setting
Automatic:
This ensures that the narrowest channel to be measured is resolved finely
enough.
RBW
Fspan narrowest channel
4
------------------------------------------------------------------------------------
To Next Page
Loading...
