NARDA SignalShark - Managing Tasks and Views

SignalShark User Manual
46
Managing tasks and views
After adding a task you may add additional views to that task and rearrange them to your
needs. As default each new task opens with a Spectrum view.
Adding a task
1. On the keypad press the Tasks key.
 The Tasks menu is displayed in the Button bar.
2.
Tap the Add Task button.
 The dialog to add a task opens.
3.
Follow the explanations given in the Add Task window to add a new task or to replace an
existing task.
 After adding a task, the dialog and the Tasks menu is closed and the new task tab is
displayed in the Task bar.
Adding a view
1. On the keyboard press the Tasks key.
 The Tasks menu is displayed in the Button bar.
2.
In the Button bar tap the Configure Task Views button.
 The ConfigTaskViews menu opens.
3.
Tap a view to select it.
4.
Tap into one of the Diamond fields to place the selected view there.
If you select a diamond field already in use, that view will be moved to another field.
5.
Repeat steps 3. and 4. to add further views.