SignalShark User Manual
122
Installing Options
To install the options:
1.
Double click the option from the windows explorer.
2.
Select Local installation (default) and click the arrow on the upper right corner to proceed.
3.
Accept the Software License Agreement.
4.
Select/deselect options if required and click the arrow to proceed.
5.
Click Install.
The selected options are installed.
6.
Click OK to accept the successful installation information.
7.
Click Restart to restart the system.
To check the installed options in the system information area:
1.
Tap the system information area (see System information area).
The system information menu opens.
2.
Tap the Options tab.
The installed options are displayed.
Updating the firmware
To update the SignalShark firmware:
1.
Start the locally stored exe file.
2.
Enter the Admin password. The default password is changeme.
3.
Select Local installation (default) and click the arrow on the upper right corner to
proceed.
4.
Accept the Software License Agreement.
5.
Read carefully and follow the important information about power connection and
shutdown.
6.
Check I have read and click the arrow to proceed.
7.
Select/deselect options if required and click the arrow to proceed.
8.
Click Install.
The selected components are installed and the system is configured.
9.
Click OK to accept the successful installation information and click Restart.
To Next Page
Loading...
