NARDA SignalShark - Administration; Operating System; System Partitions; User Management

115
Administration
Operating System
This chapter describes the handling of the Windows operating system of the SignalShark.
Please note, that only features are described which are special to the SignalShark.
For general information about the Windows operating system see Related documents.
All changes depending to the operation system must be done with the windows account
Admin.
System partitions
The system contains an SSD with two main partitions:
•
C:\OperatingSystem
This contains the operating system and the firmware.
•
D:\Data
This partition contains the measurement and user data (i.e. screen shots, measurement
data, settings …).
The data partition is available via network as shared folder.
User management
There are two user accounts:
•
User
This is the default windows user for all measurements.
Password: changeme
•
Admin
This is the administration user.
Password: changeme
Please do not add additional user accounts to the system.
To change the password:
1.
On the desktop right click the Change_Admin_PW button and select Run as
administrator.
2.
Type a password in the command line and retype it.
3.
Press any key to close the window.