6. Scroll down the Result list and double-click EK-TL A Kit to load this drum kit into Group
A:
3.1.2 Loading a Drum Kit from the Factory Library Using the Controller
On your controller, do the following:
1. Press button A on the left of your controller to select the first Group slot. This is where
you are going to load the drum kit. Button A should be lit to indicate that it is selected.
2. Press the BROWSER button at the top left of your controller.
⇨ The BROWSER button lights up. In the left display, you now are presented with a selec-
tion of choices.
3. Press Button 1 or Button 2 above the displays to select GROUPS.
First Steps
Loading a Drum Kit from the Factory Library
MASCHINE - Getting Started - 36
To Next Page
Loading...
