Native Instruments MASCHINE MK3 Getting Started

Available both on your controller and in the software, the Browser will be the preferred way to
open a project when working on your controller. Here you will use a nice feature of MASCHINE:
Each file you created and saved in MASCHINE is automatically put in “User” content. Hence,
you will select the User icon in the Content selector to quickly find your tutorial Project again.
Opening a Project in the Software
In the MASCHINE software, the Browser is found in the left part of the window.
If you cannot see the Browser in the MASCHINE software, click the little magnifying glass in
the Header at the top of the MASCHINE window in order to show the Browser:
Enable the magnifying glass to display the Browser.
To open the tutorial Project, do the following:
1. At the top left, click the button showing the Project icon to get a list of all available
Projects in the Library:
Building Your Own Drum Kit
Opening Your Project
MASCHINE - Getting Started - 50

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs