Native Instruments MASCHINE MK3 Getting Started

2. In the Content selector to the right, click the User icon to select only the user-created
Projects:
In the result list below, you now have one unique Project left — your “My First Project”:
3. Double-click this unique entry to load the Project in MASCHINE.
If you have already created other Projects in MASCHINE, they will also appear in the re-
sult list along with your tutorial Project.
Opening a Project Using the Controller
Now try operating MASCHINE via the controller wherever possible. To open a Project via the
controller, you will follow the same process as above, filtering MASCHINE objects to narrow
your search until you find your tutorial Project. This is similar to what you did when loading a
drum kit in the previous tutorial. Do the following:
1. Press BROWSER to show the Browser.
⇨ The BROWSER button lights up.
2. Press Button 1 above the displays repeatedly until PROJECTS is selected.
Building Your Own Drum Kit
Opening Your Project
MASCHINE - Getting Started - 51

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs