Reflashing the Printer Firmware 6-137
The printer firmware can be updated from the host terminal, a laptop, or a PC by
running the TSEFlash.exe utility. The three file formats for the flash firmware are the
following:
• IPL—Boot Firmware
• LAN—Boot Firmware for LAN
• MFW—Main Firmware
Examples of the firmware are the following:
• 7198RoL_V2001.ipl—7198 RoL Printer Boot Firmware
• 7198RoL_V2001.lan—7198 RoL Printer Boot Firmware for LAN
• 7198RoL_V5464.mfw—7198 RoL Printer Main Firmware
Note: These are examples only. The firmware version varies based on the printer and
when updates are provided.
To reflash a firmware into the printer, unzip the flash utility and the flash files being
used into a directory on the hard disk.
Using TseFlash.exe utility
On the host terminal or PCrunning Windows, run TSEFlash.exe*** to start the
program. A window similar to the example below will appear on the screen.
Note: The flash utility shown is for demonstration purposes only. Visit NCRSupport
Site for the latest release.
To Next Page
Loading...