EasyManua.ls Logo

NEC DT700 - Dialing from the Personal Directory; To Dial a Number from the Personal Directory

NEC DT700
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ADVANCED PHONE FEATURES
The Personal Directory
5-94 DT700 User Manual
Figure 5.54 Directory Entry Not Found
DIALING FROM THE PERSONAL DIRECTORY
To dial a number from the Personal Directory
1 Press the Menu key.
2 Select 1 Personal Directory.
3 Use the cursor pad or the Up and Down Soft Keys to scroll to scroll to the entry you
want to dial.
4 Do one of the following:
To dial the number directly:
Lift the telephone handset, or press the Speaker key or press Enter b on the cursor
pad.
The number will be dialed exactly as it is entered in the Personal Directory. If you are
dialing an outside number, you may need to enter an outside access code before the
call can be dialed successfully.
If you hear a fast busy signal after trying to dial the number directly, you may need to
edit the number before dialing so you can add the outside access code to the number.
To edit the number before dialing:
a. Press the More Soft Key twice, and then the Detail Soft Key.
Figure 5.55 More and Detail Soft Keys
b. Press the Dial Soft Key, or Enter b on the cursor pad.

Table of Contents

Other manuals for NEC DT700

Related product manuals