NEC DT700 - To View the Maximum Numbers of Calls You Can Handle on Your Phone

BASIC SETTINGS/CONFIGURATION
Basic Setup with the Menus and Cursor Pad
3-50 DT700 User Manual
Figure 3.42 Select Network Information
4 Use the cursor pad or the  Up and  Down Soft Keys to scroll to the IP Address
screen.
Figure 3.43 IP Address
5 Press the Exit Soft Key to return to the Status menu.
Note:
You cannot change these settings on your phone. To change any of these
settings, contact your system administrator.
To view the maximum numbers of calls you can handle
on your phone
The maximum number of calls you can handle concurrently is determined by your
system administrator, but you can view the maximum number of calls that are allowed
concurrent on your phone from the Status menu.
1 Press the Menu key.
2 Select 6 Status.
3 Select 3 SIP Information.
Figure 3.44 Select SIP Information
4 Use the cursor pad or the  Up and  Down Soft Keys to scroll to the Max Calls screen.