NEC DT700 - To View the Phone Settings; To View the Firmware Information for Your Phone; To View the IP Address of Your Phone

. . . . .
BASIC SETTINGS/CONFIGURATION
Basic Setup with the Menus and Cursor Pad
DT700 User Manual 3-49
To view the phone settings
1 Press the Menu key.
2 Select 6 Status.
Figure 3.40 Status options
3 Select 1 Terminal Information to view the hardware and firmware information for your
phone, or select 2 Network Information to view the network information for your
phone, or select 3 SIP Information to view the settings for your phone and SIP account
on the network.
4 Use the cursor pad or the  Up and  Down Soft Keys to scroll through the phone
settings.
To view the firmware information for your phone
1 Press the Menu key.
2 Select 6 Status.
3 Select 1 Terminal Information.
4 Use the cursor pad or Up/Down Soft Keys to scroll to the Firmware Version screen.
Figure 3.41 Firmware version
5 Press the Exit Soft Key to return to the Status menu.
Note:
You cannot change these settings on your phone. To change any of these
settings, contact your system administrator.
If you need to upgrade to the latest firmware version available for your phone on your
network, restart your phone.
To view the IP address of your phone
If you are having problems with your phone and you are troubleshooting problems
with your phone, you may need to know the IP Address of your phone.
1 Press the Menu key.
2 Select 6 Status.
3 Select 2 Network Information.