ADVANCED PHONE FEATURES
Speed Dial and Programmable Keys
5-120 DT700 User Manual
Directory entry, or set it up using the Feature Key and select to show the entry in the
Personal Directory.
The Speed Dial information will be listed in the Personal Directory similar to all other
Personal Directory entries, and you can also view the entry information using the
Feature Key.
To add a Programmable Key as a Speed Dial Key
with a Personal Directory entry using the Feature Key
1 Press the Feature key. The Feature key LED lights a steady red.
Figure 5.114 Feature Key
2 Press the programmable key that you want to set as a Speed Dial Key. The
programmable key LED flashes.
Figure 5.115 Programmable Key LED
Note: If the Speed Dial has already been programmed, the name and number
information displays. You will need to press the Exit Soft Key and select
another programmable key.
3 Use the telephone keypad to enter the name and press Enter b on the cursor pad or the
OK Soft Key.
Figure 5.116 Speed Dial Name Screen
Up to 24 characters may be entered for the name.
• Press the Delete Soft Key to delete the last character entered, or press the
Cancel Soft Key to return to the previous screen.
• To switch between first letter uppercase, all uppercase, all lowercase and
numbers for keypad entry, press the
* key on the keypad.
• To add a space to an entry, press
#.
• To enter special characters, press the
1 key.
For a list of special characters, see “Speed Dial and Personal Directory
Character Sets” on page 5-145.
• To move the cursor position in the LCD screen, use the right and left cursor pad
keys.
4 Use the telephone keypad to enter a phone number for the entry and press Enter b on
the cursor pad or the OK Soft Key.
To Next Page
Loading...
