ADVANCED PHONE FEATURES
Speed Dial and Programmable Keys
5-116 DT700 User Manual
To add a Programmable Key/Speed Dial Key
without a Personal Directory entry
1 Press the Feature key. The Feature key LED lights a steady red.
Figure 5.103 Feature Key
2 Press the programmable key that you want to set as a Speed Dial Key. The
programmable key LED flashes.
Figure 5.104 Programmable Key LED
Note: If the Speed Dial has already been programmed, the name and number
information displays. You will need to press the Exit Soft Key and select
another programmable key.
3 Use the telephone keypad to enter the name and press Enter b on the cursor pad or the
OK Soft Key.
Figure 5.105 Speed Dial Name Screen
Up to 24 characters may be entered for the name.
• Press the Delete Soft Key to delete the last character entered, or press the
Cancel Soft Key to return to the previous screen.
• To switch between first letter uppercase, all uppercase, all lowercase and
numbers for keypad entry, press the
* key on the keypad.
• To add a space to an entry, press
#.
• To enter special characters, press the
1 key.
For a list of special characters, see “Speed Dial and Personal Directory
Character Sets” on page 5-145.
• To move the cursor position in the LCD screen, use the right and left cursor pad
keys.
4 Use the telephone keypad to enter a phone number for the entry and press Enter b on
the cursor pad or the OK Soft Key.
To Next Page
Loading...
