NEC DT700 - Speed Dial Key Operation; To Originate a Call from Speed Dial Keys

ADVANCED PHONE FEATURES
Speed Dial and Programmable Keys
5-114 DT700 User Manual
Figure 5.100 Exit Soft Key
SPEED DIAL KEY OPERATION
When you press a Speed Dial Key, the number configured for that Speed Dial Key is
dialed.
If you need to edit the number before dialing, you can use the Dial Soft Key to allow
edit the number before dialing if you have Edit Before Dialing Enabled on the phone.
This allows you to add a prefix to the number (such as an outside service or access
code) before dialing.
To originate a call from Speed Dial Keys
Using the handset
• Lift the handset and press the desired Speed Dial Key.
Or
• Press the Feature Key, then press the Speed Dial Key to view the Speed Dial details, then
lift the handset.
Using the speaker
• Press the Speaker Key, then press desired Speed Dial Key.
Or
• Press the Feature Key, then press the Speed Dial Key to view the Speed Dial details, then
press the Speaker Key.
Using a headset
• Press the desired Speed Dial Key.
Or
• Press the Feature Key, then press the Speed Dial Key to view the Speed Dial details, then
press the Dial Soft Key.
Note:
Speed Dials are dialed as they are programmed into the phone. If you get a
fast busy signal when you attempt to dial using a Speed Dial Key, you may
need to program an outside line access code into the Speed Dial number.
To edit the number before dialing
1 Press the Feature Key, and then press the desired Speed Dial Key.
2 Press the Dial Soft Key.