NEC DT700 - CALL WAITING;CONCURRENT CALLS

. . . . .
BASIC PHONE OPERATION
Call Waiting/Concurrent Calls
DT700 User Manual 4-61
3 If you want to transfer the call to your telephone handset, lift up the telephone handset
to continue the call. If you want to transfer back to the headset, press the
Headset Soft Key, the place the telephone handset back on-hook.
Note:
While you are on a call, if you press the Headset Soft Key while the telephone
handset is on-hook, your call will be dropped. Make sure you pick up the
telephone handset to continue your call before you press the
Headset Soft Key.
To transfer the current call to your headset
1 While on a call using the telephone handset, press the Headset Soft Key to transfer the
call to your headset, then place the telephone handset back on-hook.
Figure 4.23 Headset icon and Headset Soft Key
2 A Headset icon displays on the LCD. If you want to transfer the call to your telephone
handset, pick up the telephone handset again.
Note:
While you are on a call, if you press the Headset Soft Key while the telephone
handset is on-hook, your call will be dropped. Make sure you pick up the
telephone handset to continue your call before you press the
Headset Soft Key.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CALL WAITING/CONCURRENT CALLS
Note: The call waiting feature and maximum number of concurrent calls you can
receive is determined by your system administrator.
If you have call waiting on your phone line, you will hear a tone in your handset and
the call indicator lamp flashes when another call on the line is waiting for consultation.
To answer the other incoming call (Call Waiting)
1 You will hear a tone that indicates you have another call. Also, the Call Indicator Lamp
on the phone will flash.
2 Do one of the following:
• To review the caller information before answering the call: Press the Line
Key, and then press the Answer key to take the call, or press the Reject Soft Key
to reject the call.
• To answer the call without reviewing the caller information: Press the
Answer key.