NEC DT700 - Call Duration; DT710 (ITL-6 DE) Phone

. . . . .
BASIC PHONE OPERATION
DT700 Basic Call Operation
DT700 User Manual 4-57
Figure 4.10 NewCall Soft Key
2 Enter the internal extension number.
You can use the Delete Soft Key to go delete the last digit (backspace).
Figure 4.11 Enter number (internal call)
3 Press the Dial Soft Key to initiate the call, or wait a few seconds for the call to be
automatically dialed.
Figure 4.12 Dial Soft Key
The call proceeds to the dialed party.
Note: You can also dial the number, then lift the telephone handset or press the
Headset Soft Key to initiate a call.
CALL DURATION
DT710 (ITL-6DE) phone
Call duration is displayed in MM:SS format for the first hour of a call, and then HH:MM
format for the remainder of the call.
Figure 4.13 Call timer for DT710 (ITL-6DE) phone