NEC DT700 - To Dial an External Number from the Call History

. . . . .
ADVANCED PHONE FEATURES
Call History
DT700 User Manual 5-81
5 To dial the call directly, lift the telephone handset or press the Speaker key initiate the
call.
To dial an external number from the Call History
1 Press the Menu key.
2 Select 2 Call History.
3 Select either 1 Missed Calls, 2 Received Calls, or 3 Placed Calls to view a call
history list.
4 Use the cursor pad or the  Up and  Down Soft Keys to scroll to the number you want
to call.
5 Press the Options Soft Key or press Enter b on the cursor pad.
Figure 5.23 Options Soft Key
6 Select 1 Dial.
Figure 5.24 Call History Options
7 If prompted, press the OK Soft Key. You can also use the Delete Soft Key and cursor pad
to enter a different number than is shown on the LCD.
If calls cannot be dialed directly from the Call History, you may need to add an outside
access code to the number before it is dialed, if required by your system.
Figure 5.25 Dial the number from the Call History
The phone dials the telephone number.
Note: To change the options about being prompted to confirm the number before
your phone dials external numbers, see “To edit the Dial Preference” on
page 3-47.