NEC DT700 - To Delete a Speed Dial Only Entry

ADVANCED PHONE FEATURES
Speed Dial and Programmable Keys
5-144 DT700 User Manual
To delete a Speed Dial only entry
For Speed Dial entries that do not have a Personal Directory entry, you can delete the
Speed Dial entry.
1 Press the Feature key. The Feature key LED lights a steady red.
Figure 5.178 Feature Key
2 Press the Speed Dial Key that you want to delete. The programmable key LED flashes,
and the Speed Dial information for the key is shown.
Figure 5.179 Programmable Key LED
3 Press the Delete Soft Key.
Figure 5.180 Delete Soft Key
4 Press the Enter b on the cursor pad or the OK Soft Key to confirm.
Figure 5.181 Delete Entry Confirm
The entry will be deleted as a Speed Dial.
5 Press Enter b on the cursor pad or the OK Soft Key.
Figure 5.182 Delete Entry Complete Menu Display
Note: For Speed Dial entries that are set as read-only by your system administrator,
an error is displayed and the entry is not deleted.