NEC DT700 - To Attach Tilt Leg

. . . . .
INSTALLATION
DT700 User Manual 2-27
Figure 2.4 Remove Tilt Leg
4 While pushing the two hooks, slide the tilt leg downward. Remove the tilt leg from the
terminal.
Figure 2.5 Remove Tilt Leg
To attach tilt leg
1 Turn the phone upside down.
2 Align the hooks (c through h) of the tilt leg over the appropriate slots (C through H) of
the phone.
3 Slide the tilt leg upward until the hooks (c and b) click into place.
b
a
Stopper
A
B
Tilt
Leg
Hook
Hook