. . . . .
BASIC PHONE OPERATION
Call Transferring and Conferencing
DT700 User Manual 4-63
3 Press the Dial Soft Key to initiate the call, or wait a few seconds for the call to be
automatically dialed.
The call proceeds to the dialed party.
4 When you have completed the call, press the EndCall Soft Key or press the switch hook
to end the call and return to your original call.
5 Press the Hold key or the Resume Soft Key to resume the original call.
Figure 4.29 Hold key
CONCURRENT CALL SHUTTLE
To switch between calls
Using the Shuttle Soft Key, you can switch between two concurrent calls.
• Press the Shuttle Soft Key to switch between the calls.
Figure 4.30 Shuttle Calls
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CALL TRANSFERRING AND CONFERENCING
CONFERENCING CALLS
The DT700 phones support 3 party conferencing.
To conference two calls
1 While on a call, press the Conf key, or press the Conf or Conference Soft Key.
Figure 4.31 Conf key on DT710 (ITL-2E) phone
To Next Page
Loading...
