NEC DT700 - PHONE SOFT KEYS

PHONE TROUBLESHOOTING
Phone Soft Keys
6-158 DT700 User Manual
For more information on the character sets, see “Speed Dial and Personal Directory
Character Sets” on page 5-145.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PHONE SOFT KEYS
The phone Soft Keys are not working
1 Verify that the phone is receiving power.
2 Some Soft Keys may not be available on your model of phone, or may be restricted by
your system administrator. Contact your system administrator to determine which
features are available for your system.
3 Restart the phone:
a. Press the Menu key.
b. Select 5 Reboot.
c. Press the OK Soft Key or b Enter key on the cursor pad to restart the phone.
Note:
If you cannot restart the phone using the Menus if your phone is locked up,
unplug the phone from power and the network for ten seconds, then reconnect
the telephone to your network and power to perform a
restart.
4 If you are still having problems with your phone, contact your system administrator.
I cannot see a particular Soft Key on my phone
1 If the More Soft Key appears on the LCD, press the Soft Key to see additional Soft Keys
for your screen.
Figure 6.17 More Soft Key
2 Some Soft Keys may not be available on your model of phone, or may be restricted by
your system administrator. Contact your system administrator to determine which
features are available for your system.
3 Restart the phone:
a. Press the Menu key.
Keypad in all lowercase entry
mode
Keypad in numeric entry mode
Feature Icon