NEC DT700 - To Shuttle between Calls During an Attended Transfer; To Switch from Transferring Calls to a Conference Call

. . . . .
BASIC PHONE OPERATION
Call Transferring and Conferencing
DT700 User Manual 4-69
To shuttle between calls during an Attended Transfer
1 While connected to both parties, press the Shuttle Soft Key.
Figure 4.48 Transfer Shuttle
You will be connected to the original caller. To continue to switch between the two
callers, press the Shuttle Soft Key.
You can also press the Conference Soft Key to connect both callers to you in a three
party conference call.
SWITCH FROM A TRANSFER TO A CONFERENCE CALL
If you start a transfer, you have the ability to start a conference call between the two
parties you can connected to in addition to the ability to transfer the call.
To switch from transferring calls to a conference call
1 While on a call, press the Transfer key.
2 Use the key pad to dial the telephone number of the party to be transferred, then press
Dial Soft Key, or wait a few seconds for the call to be automatically dialed.
3 To make this a conference call between yourself and the other two parties, press the
Conf key, or press the Conf or Conference Soft Key.
Figure 4.49 Conf key on DT710 (ITL-2E) phone
Figure 4.50
Conf Soft Key on DT710 (ITL-6DE) phone