NEC DT700 - To Set the Time Format

. . . . .
BASIC SETTINGS/CONFIGURATION
Basic Setup with the Menus and Cursor Pad
DT700 User Manual 3-45
5 Select the desired date format. Then press Enter b on the cursor pad or the
OK Soft Key to accept the setting.
You can also press the Cancel Soft Key to exit without making any changes.
Table 3.1 Date Formats
Note: The setting that highlighted is the setting that is currently enabled.
To set the Time Format
Determines whether time is displayed with a 12-hour or 24-hour clock format.
1 Press the Menu key.
2 Select 3 User Settings.
Figure 3.29 Phone main menu
3 Select 3 Date/Time.
Figure 3.30 Select Date and Time options
4 Select 2 Time Format.
No. Menu Items
1
Mon, Jan 1 Selects Mon, Jan 1 date format
2
Mon, 1 Jan Selects Mon, 1 Jan date format
3
Jan 1, Mon Selects Jan 1, Mon date format
4
1 Jan, Mon Selects 1 Jan, Mon date format
5
YYYY/MM/DD Selects YYYY/MM/DD date format
6
MM/DD/YYYY Selects MM/DD/YYYY date format
7
DD/MM/YYYY Selects DD/MM/YYYY date format