. . . . .
ADVANCED PHONE FEATURES
The Personal Directory
DT700 User Manual 5-97
5 Use the telephone keypad to enter a phone number for the entry and press Enter b on
the cursor pad or the OK Soft Key.
Figure 5.61 Enter Telephone Number
Up to 24 characters may be entered for the number. Only digits, “*” and “#” may be
entered.
• To move the cursor position in the LCD screen, use the right and left cursor pad
keys.
• You can also press the Delete Soft Key to delete the last character entered, or
press the Cancel Soft Key to return to the previous screen.
6 Use the telephone keypad to enter a Speed Dial number (if desired) for the entry and
press Enter b on the cursor pad or the OK Soft Key.
Note:
For more information on Speed Dial Keys, see “Speed Dial and Programmable
Keys” on page 5-108.
Speed Dial entries can be internal or external numbers.
Figure 5.62 Select Speed Dial Number
The number of available Sped Dial Keys and their associated numbers depend on
your model of DT700 phone. For more information on the valid Speed Dial Keys for
the specific phone models, see “Speed Dial Key Numbering” on page 5-110.
• You can also press the Delete Soft Key to delete the last character entered, or
press the Cancel Soft Key to return to the previous screen.
7 If you have assigned a Speed Dial to the entry, you can select the monitor settings for
this entry and press Enter
b on the cursor pad or the OK Soft Key.
Note:
Monitoring can only be done on other lines that are internal to your system.
You cannot monitor external or outside lines.
To Next Page
Loading...
