4. LCD Menu
140
Date/Time
Use this to set the date and time on the projector.
The internal clock in the projector uses coordinated universal time (UTC). This sets the time
difference between the standard time in your region and UTC.
←Select the item to be set
←Input numeric values
Press the LEFT/RIGHT button to change the time difference from the projector internal
clock (UTC).
Tips
If you are using DCC for S2, you can set the date and time from your computer. Refer to “Digital Cinema
Communicator for S2 Installation Manual” for details.
New Bulb
When the lamp bulb is replaced, reset the lamp time and select the lamp bulb type. Ask our
service personnel to configure the setting when replacing the lamp bulb. This menu is active in
standby mode only.
To Next Page
Loading...
