4. LCD Menu
141
Bulb Warning
To set the time for display of lamp bulb warning. This menu is active in standby mode only.
← Displays the currently selected item with asterisk (*).
← Displays the setting
Manual Manually specify the warning time (H). Press the SELECT key to
display the numeric input line (input the value using the remote
controller).
Use Bulb Entry Warning time set by BulbEntry is used.
New Lamp house
When the lamp house is replaced, reset the lamp house time and select the lamp house. This
menu is active in standby mode only.
← Displays the currently selected item with asterisk (*).
← Displays the setting
← Select the items for which the usage times are cleared.
← Displays the currently selected item with asterisk (*).
← Displays the setting
← Select the mode for lamp house usage time.
Single To set the mode in which lamp house is not replaced (Single mode)
Multi To set the mode in which the lamp houses are alternately replaced for
use (Multi-mode).
- Lamp house 1: To use the lamp house 1
- Lamp house 2: To use the lamp house 2
House To set the mode in which lamp house is not replaced (Single mode)
House1 When multi-mode lamp 1 is used
House2 When multi-mode lamp 2 is used
Usage Clear Reset the lamp house usage time.
Usage Mode Set the mode for lamp house usage time.
To Next Page
Loading...
