5. Steps to upgrade to 4K
178
Error code Error message Description
481 Security Enclosure Not Armed Enigma security not armed.
482 Physical Marriage Tamper Latched physical marriage tamper
condition on Enigma board.
483 Logical Marriage Tamper Logical marriage tamper condition exists in
Enigma.
484 Marriage NOT Active Marriage between ICP and Enigma has
NOT been established (active).
486 Service Door Tamper Latched service door tamper condition on
Enigma board.
487 Security Log Error Security log is full and no more log entries
can be created in Enigma. It is the server's
responsibility to avoid the issue.
488 Security Battery Low Warning Close to “(477) Security Battery Event”.
489 Security Log Warning Security log is almost full in Enigma.
Close to “(487) Security Log Error”.
500 IMB Comm Fail No communication with the IMB.
510 IMB:System Error IMB Status error
511 IMB:Self Test Error IMB Status error
519 IMB:Certificate or Key Error IMB Status error
520 IMB:ICP Communications Status IMB fails to do logical marriage to ICP
when IMB powers up. Because of no
communications with ICP during logical
marriage.
537 IMB:RTC Error IMB RTC is “invalid”.
543 IMB:FPGA Temperature out of range IMB Status error
550 IMB:Supply voltage out of range IMB Status error
574 IMB:Security Tamper Security tamper condition exists in IMB.
577 IMB:Security Battery Event Battery tamper condition exists in IMB.
581 IMB:Security Enclosure Not Armed IMB security not armed.
582 IMB:Physical Marriage Tamper Latched physical marriage tamper
condition on IMB.
583 IMB:Logical Marriage Tamper Logical marriage tamper condition exists in
IMB.
584 IMB:Marriage NOT Active Marriage between ICP and IMB has NOT
been established (active).
586 IMB:Service Door Tamper Latched service door tamper condition on
IMB
588 IMB:Security Battery Low Warning Close to “(577) IMB: Security Battery
Event”.
To Next Page
Loading...
