2. Setting Up Your Projector
85
[9] Mount the front cover on the
projector.
<1> Align the two holes at the bottom of
the cover with the two protrusions
at the bottom of the projector and
insert the protrusions into the holes,
then close the cover.
<2> Lock using the cover key.
Mount the sponge attached to the lens
after screen ratio adjustment.
1
2
3
4
5
LAMP
MENU
ENTER
DOUSER
KEY
LOCK
EXIT
IMB
6
7
8
This completes the installation of the primary lens.
Key lock