2. Setting Up Your Projector
95
[5] Remove the iris plate of the
engine block.
Loosen the four clamping screws to
remove the iris plate.
Do not loosen any screws other than those
specified.
[6] Remove the iris screws.
Iris plate is provided with a default iris.
Remove 3 screws from the iris.
[7] Mount the small iris.
Use 3 screws you have removed at Step
[6] to mount the small iris among
accessories with overlapping it over the
iris.
[8] Remount the iris plate now
attached with the small iris
to the engine block.
Use 4 screws you have removed at Step
[5] to mount the iris plate.
[9] Remount the fixing-use
bracket.
<1> Align the convex portion of the
fixing-use bracket with the concave
portion of the projector.
<2> Use 3 screws you removed at Step
[5] to fix the fixing-use bracket.
Concave
portion
Convex
portion
To Next Page
Loading...
