NEC NEAX 2000 IPS - Call Forwarding-Not Available

CHAPTER 3 SYSTEM DATA PROGRAMMING
– 133 –
NWA-008855-001 Rev.1.0
avch3001.fm
Call Forwarding-Not Available
DESCRIPTION DATA
Assign the destination VMS station for Call
Forwarding-Not Available.
•
(1)
(2)
Y=20
00-63: Tenant No. of Virtual Station
X-XXXXXXXX: VMS Station No.
Assign the access code to set/cancel Call For-
warding when the incoming call is not avail-
able, and set the access code to replay the
message.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A189: Call Forwarding-Not Available Set
A190: Call Forwarding-Not Available
Cancel
A191: Call Forwarding-Not Available Re-
play
Specify whether confirmation of message ex-
istence by Special Dial Tone is available or
not.
If the second data is set to 0, the Special Dial
Tone is sent when a message exists.
•
(1)
(2)
Y=2
12: Confirmation by Dial Tone
0 : Available
1 : Not available
Assign Service Restriction Class A to each PS
station.
•
(1)
(2)
Y=02
Service Restriction Class A
X-XXXXXXXX: Virtual Station No. as-
signed by CM14
XX ZZ
XX: 00-15 : Service Restriction Class A
Allow Service Restriction Class A for Call
Forwarding-Not Available.
•
(1)
(2)
Y=115
Call Forwarding-Not Available
00-15: Service Restriction Class A
assigned by CM12 Y=02
1 : Allow
START
CM51
CM20
CM48
CM12
CM15
END
WCS FEATURE PROGRAMMING