Radio Channel Changeover
Page 34 ND-91638-007(E)
Issue 6
Radio Channel Changeover
General Description
This feature is to supervise and changeover the channel automatically to avoid interference and to maintain the
speech quality.
Configuration Application
Integrate Type and Adjunct Type
Operating Procedure
No manual operation is required.
Service Conditions
1. There is no interruption in the speech when this feature is activated.
2. The new channel is assigned to the party which has moved into the service area.
3. When there is no idle channel, the call is continued on the same channel until communication becomes un-
available, then Automatic Release - Out of Cell Calls is activated.
To Next Page
Loading...
